1. Use the information marked on the nameplate of the self-cleaning filter and do not tamper with it at will.
2. When the filter is damaged, do not use it again. Stop the machine and use it after repair.
3. Do not disassemble, assemble or repair it privately to avoid danger to the human body and damage to the machine body. When the machine is damaged, it should be handed over to professionals for repair.
4. Ensure that the self-cleaning filter is in the correct water level. The filter cannot be used without water or insufficient water.
5. Ensure that the power cord and power socket are dry.
6. Regularly maintain and clean the self-cleaning filter, replace the corresponding parts, etc. Before cleaning and maintenance, remember to disconnect the power supply to ensure your own safety.
In addition, the most important thing about the self-cleaning filter is the chip of the self-cleaning filter. The chip is commonly made of stainless steel. After using this material for a period of time, impurities will accumulate, which will affect the work efficiency. Therefore, it is necessary to clean it regularly to remove impurities on the chip.
Also, pay attention to the pressure of the equipment. When the pressure decreases, the flow rate will slow down, resulting in a decrease in the work efficiency of the self-cleaning filter. If this happens, it means that the filter needs to be cleaned and maintained.
To extend the service life of the self-cleaning filter, it is necessary to regularly clean and maintain the filter element. Check the damage of the filter screen from time to time. If it is seriously damaged, it should be replaced in time. The seal between the self-cleaning filter and the connecting frame must be strictly sealed to ensure that there is no air leakage or water leakage. When filtering some high-temperature or high-humidity substances, it is necessary to replace the high-temperature or humidity-resistant filter paper to ensure the normal completion of the work.
